0

Pyroland – PYL2001 – Mother of Dragons

Home › English › Pyroland – PYL2001 – Mother of Dragons

PyroBunny 2023-06-23 05:47:40
2 voices
3 replies
  • Author
    Posts
  • PyroBunny
    Joined: Jun 2023
    Posts: 25
    Location: Redmond, WA
    Newcomer
    2023-06-23 05:47:40
    Likes:

    Pyroland – PYL2001 – Mother of Dragons – 1.4g – 6″ – single – shell – 6/12

     

    Product page: https://pyrolandfireworks.com/store/p255/mother_of_dragons_6_inch_shells.htm

    Video: https://www.youtube.com/watch?v=Z0CAeC-wZo0

     

    6″ 194.0m 3.02 PFT Strobing Comet Red To Peony

     

    Not sure how to get the time rain crackle effect. Also no idea how to make the strobe slower.

    PyroBunny
    Joined: Jun 2023
    Posts: 25
    Location: Redmond, WA
    Newcomer
    2023-06-24 09:08:18
    Likes:

    Closer…

     

    3″ 194.0m 3.02 PFT Red Strobing Comet To Short Peony To Short Popcorn Crackle

    DrewFinale
    Joined: Dec 2019
    Posts: 629
    Location: United States
    Silver
    2023-06-26 17:05:34
    Likes:

    Hi PyroBunny, calling these 6″ shells is a bit of a marketing gimmick. Aerial shells are measured by the diameter of the tube that they are launched from. Sure, these shells are 6″ tall, but if they fit into a standard consumer mortar tube, then they are really no larger than 2″. This matters in Finale 3D because simulations are scaled based on shell size (i.e. caliber). In Finale 3D, a 3″ shell reaches a height of about 300ft, and has a break-width of almost 240ft. A 6″ shell reaches 600ft and breaks 500ft across. Finale 3D also uses shell size to calculate mortar/rack counts. If you create a 3″ or 6″ shell, Finale 3D is going to tell you it needs a mortar of that size.

    PyroBunny
    Joined: Jun 2023
    Posts: 25
    Location: Redmond, WA
    Newcomer
    2023-06-27 19:21:00
    Likes:

    DrewFinale what would your recommended VDL for this product be?

  • Author
    Posts

Please login to reply to this topic.