0

Trajectory Lines Missing?

Home › English › Trajectory Lines Missing?

Pyro_1640000 2025-04-02 08:07:32
3 voices
3 replies
  • Author
    Posts
  • Pyro_1640000
    Joined: Dec 2018
    Posts: 4
    Location: Okehampton, England, United Kingdom
    Newcomer
    2025-04-02 08:07:32
    Likes:

    Hi

     

    I’ve just loaded the latest release — finale3d-installer-2025.03.30-47fdc4a12  —  and the trajectory lines for the fireworks are not showing.  When you hover over a firework the position it’s located at is highlighted but no trajectory line.  I’ve looked for a setting to change this but unable to resolve the issue.

     

    I’ve reverted back to a previous version so I have functioning software.

     

    Is this a bug or a changed setting?

     

    Richard

    NEC
    Joined: Apr 2019
    Posts: 65
    Location: San Antonio, Texas, United States
    Newcomer
    2025-04-02 10:49:35
    Likes:

    I just installed the latest version and am not having the issue you’re describing.

    Maybe check Show–>Show Settings–>Hide Trajectory dots when not selected.

    DrewFinale
    Joined: Dec 2019
    Posts: 716
    Location: United States
    Silver
    2025-04-02 22:04:32
    Likes:

    Hi Richard, sorry to hear about the trajectory dots issue. We haven’t made any changes in this area, and we don’t currently have any similar reports from other users. The setting NEC mentioned is a good starting point. Another thing to try would be starting a new blank show and adding an effect to see if the problem persists. That will tell us if the problem is specific to a particular show or applies to every show on your machine. Hopefully the problem only applies to a particular show because machine specific issues are often the hardest to troubleshoot.

    Pyro_1640000
    Joined: Dec 2018
    Posts: 4
    Location: Okehampton, England, United Kingdom
    Newcomer
    2025-04-07 12:46:04
    Likes:

    Hi Drew, Thanks for the reply.  Yes it does seem to be a show specific problem and not the software version. Copying into a new show has resolved the issue.  I’ll let you know if it is a recuring problem.  Richard.

  • Author
    Posts

Please login to reply to this topic.