When using 4 positions. FireTEK addressing creates 4 modules but I want 1 module

[Pyro_Gweedo]

Likes:

|

Share this thread

When using 4 positions. FireTEK addressing creates 4 modules but I want a single module with 4 rails.

Right now, my cure is to manually correct but there has to be a better way. I have the Hobbyist level.

Please recommend a better solution…Thanks Much !

[Dirk Enders – PyroOffice]

Likes:

|

Share this thread

Hi Pyro_Gweedo,

 

the basis for your goal is to use section fields in the position properties and and different setting in the address dialoug. The basis is described here:

https://finale3d.com/documentation/sharing-modules-across-multiple-positions/

 

Additional, you can force that each position have there own slatss with the following settings when you addres:

Hope this helps
Dirk

[DrewFinale]

Likes:

|

Share this thread

Hi Pyro_Gweedo, also check out these video tutorials from the Finale 3D Help Center:

 

1) How to Share Modules Between Positions

 

2) Sharing fireTEK modules and slats across multiple positions

[Author]

Posts