Explo GX2 Flamer

With a gas-projector of the GX2 series, there are no more borders to the creation of musical synchronized flame pillars, or fireballs. Thanks to its sturdy built the gas-projector is especially well suited for outdoor use.

The gas-projector is controlled with the Explo-Mastermodule, or the RX-1K Gas, but can also be ignited with an external ignition impulse.

Visit Explo

  • no image
    Step 1:
    Configure DMX Fixtures
    Configure firing positions as DMX fixtures by right-clicking in the 3D view.
  • no image
    Step 2:
    Design
    Design the show by adding compatible DMX effects to fixtures.
  • no image
    Step 3:
    Set firing system
    Use the menu item "Addressing > Address show..." and select a firing system that supports DMX.
  • no image
    Step 4:
    Export Script
    Use the menu item "Export > Export firing system script files(s)..." to generate the script file for your firing system.
DMX channels
DMX channels for 1CH personality
  1. Channel 1 (DMX Channel Base + 0) -- On/Off (0 – 253 = OFF; 254- 255 = ON)
DMX channels for 2CH personality
  1. Channel 1 (DMX Channel Base + 0) -- Ignition (0 – 253 = OFF; 254- 255 = ON)
  2. Channel 2 (DMX Channel Base + 1) -- Duration And Safety ( 0-10 = Disabled; 11-200 = ON for duration; 201-250 = ON continuously; 251-255 = Disabled)
Special Features
  1.  Synchronized flame pillars, or fireballs
Documentation
  1. 1
    Flame fixtures basic instructions
  2. 2
    Explo GX2 Flamer instructions and technical documentation
  3. 3
    General documentation