0

Explo GX3 Power Flame

The GX3 Power Flame is a special effect device with an extreme flame height of up to 20 meters. This flame projector is fueled by standard propane- / butane- gas bottles, and uses nitrogen to create the needed pressure.

The GX3 Power Flame can be controlled via radio, as well as DMX, and be added to an automated show very easily.

Visit Explo

  • no image
    Step 1:
    Configure DMX Fixtures
    Configure firing positions as DMX fixtures by right-clicking in the 3D view.
  • no image
    Step 2:
    Design
    Design the show by adding compatible DMX effects to fixtures.
  • no image
    Step 3:
    Set firing system
    Use the menu item "Addressing > Address show..." and select a firing system that supports DMX.
  • no image
    Step 4:
    Export Script
    Use the menu item "Export > Export firing system script files(s)..." to generate the script file for your firing system.
DMX channels
  1. Channel 1 (DMX Channel Base + 0) -- Ignition (0 – 253 = OFF; 254- 255 = ON)
  2. Channel 2 (DMX Channel Base + 1) -- Duration (0-255 = duration from 0.5s to 2.5s)
  3. Channel 3 (DMX Channel Base + 2) -- Flame Enable And Recharge ( 0-84 = pilot flame only; 85-170 power flame enabled with recharging; 171-255 power flame enabled without recharging)
  4. Channel 4 (DMX Channel Base + 3) -- Safety ( 0-49 = disabled; 50-200 = ON for duration; 201-255 = disabled)
Special Features
  1. Vertical flames reaching insane heights.
Documentation
  1. 1
    Flame fixtures basic instructions
  2. 2
    Explo GX3 Power Flame instructions and technical documentation
  3. 3
    General documentation