Addressing for Cobra 36M/72M

Home › English › Addressing for Cobra 36M/72M

DB 2023-06-10 02:57:06
2 voices
1 reply
  • Author
    Posts
  • DB
    Joined: Jun 2020
    Posts: 15
    Location: Grayslake, Illinois, United States
    Newcomer
    2023-06-10 02:57:06
    Likes:

    Is there a way to make sure the 2 banks in a 36M and the 4 banks in a 72M are addressed near the same positions? For example, if I have a 3 position shoot site (Left, Center and Right), how can I ensure all 4 banks for the 72M are near the same position vs 1 bank for the right side and the other 3 banks for the left side?

    NEC
    Joined: Apr 2019
    Posts: 23
    Location: San Antonio, Texas, United States
    Newcomer
    2023-06-10 13:45:52
    Likes:

    SInce the 36/72 are represented by either 2 or 4 18 cue modules you’d just place the 36/72 where you want it and set the banks to the appropriate channel addresses needed.  There are ways to make sure the addresses are consecutive based on position/rack pods but, for me, it’s never been worth the time to make sure that happens since address changing is so quick on site.  I have put temporary labels on modules if I’m preaddressing mods with location and bank/address info.

  • Author
    Posts

Please login to reply to this topic.